Overview
Photek’s Bench Top power supplies come with one to four high voltage outputs.
The DPS1 is designed for detectors that use an integral voltage divider network to provide individual bias voltages and have electronic anodes rather than phosphor screens.
The DPS2, DPS3 and DPS4 are designed for use with phosphor screen image intensifiers having either a single or multiple MCPs respectively.
All of the Bench Top supplies are fully compatible with Photek’s family of Gate Modules.
Contact Photek for power supplies with additional outputs or for alternative voltage configurations.
Specifications
DPS1 | DPS2 | DPS3 | DPS4 | BPS1-25P | |
No. of High Voltage Outputs | 1 | 2 | 3 | 4 | 1 |
Image Intensifier | No | Yes | Yes | Yes | No |
MCP Detector | Yes | Yes | Yes | Yes | No |
Photomultiplier Tube | Yes | No | No | No | No |
High Resolution Intensifier | No | No | No | No | Yes |
DPS2 Example Configuration
DPS2 can be used for single MCP Image Intensifiers with an appropriate gate module.
DPS3 Example Configuration
DPS3 can accommodate image intensifiers with up to 3 MCPs and an appropriate gate module.
